 |
Bones Swiss Ceramics
Bones Swiss Labyrinth Ceramics are in a class by themselves compared to all other BONES bearings. If you want the best BONES bearing there is, this is it. The Cerbec™ ceramic balls are much lighter, harder, stronger, water proof, and longer lasting than the finest steel balls.
| OPTIONS
$200.00 |
back to top
|
 |
NEW BLACK BALLZTM Ceramic
Our BLACK BALLZTM Silicon Nitride Ceramic Speed Bearings are a Roller Skate Depot Exclusive product. These ceramic balls are lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. Ceramic balls are 60% lighter, 50% stiffer, 70% smoother, and much, much harder than steel balls. Packaged in SPEED JIUZETM
Ceramic balls have 100X better rolling contact fatigue life in comparison to the finest quality steel balls.
These bearings are lighter than the Comparable Steel Bones Swiss and Steel Boss Swiss BSB bearings. We have determined that our BLACK BALLZ perform best using a very small amount of Dry Film Lube such as our SPEED JUIZETM.
If you want the best, but don't want to pay for the NAME, this is the bearing for you. At almost half the price.
NOW AVAILABLE
| OPTIONS
$105.00 |
back to top
|
 |
NEW SPEED BEADZTM Ceramic
Our SPEED BEADZTM Zirconia Ceramic Speed Bearings are a Roller Skate Depot Exclusive product.
These bearings are lighter than the Comparable Steel Bones Swiss and Steel Boss Swiss BSB bearings.
We have determined that our SPEED BEADZ perform best using a very small amount of Dry Film Lube such as our SPEED JUIZETM.
Zirconia balls are light, hard, strong, water proof, and resist dirt which makes them longer lasting than the finest steel balls.
Solid Zirconia Ceramic for the price of Steel balls.
AVAILABLE AUG 30
| OPTIONS
$75.00 |
back to top
|
 |
NEW STEELEAZETM
Our STEELEAZETM Steel Speed Bearings are a Roller Skate Depot Exclusive product. The Steel balls are smooth, efficient & long lasting, they have non-contact removable rubber shields and high speed nylon ball cage for easy cleaning and relubricating.
We have determined that our STEELEAZE perform best using a very small amount of Dry Film Lube such as our SPEED JUIZETM.
NOW AVAILABLE
| OPTIONS
$25.00 |
back to top
|
 |
8mm to 7mm Axle Sleeves
The RDD Brand Bearings (above) are only made in 8mm. Use 8mm bearings on your 7mm axle by using these spacer sleeves.
Sold in sets of 8. |
$5.00 |
back to top
|
 |
NEW SPEED JUIZETM Lube
Our NEW SPEED JUIZETM Dry-Film Bearing Lube is another NEW exclusive product for RDD and is simply the best bearing lube on the market. SPEED JUIZE goes on wet but when it dries it leaves a thin film of dry lubrication that will not attract dirt, dust or other foreign materials. Our built-in cleaners dissolve solidified grease, oil and accumulated carbon from bearings. Inhibits rust and corrosion & displaces moisture. Reduces friction, bearing wear and energy consumption. This is the stuff!
NOW AVAILABLE
| OPTIONS
$5.50 |
back to top
|
 |
Bones Swiss Labyrinth
Bones Bearings has added a new 7-Ball Swiss bearing with double labyrinth, non-contact, removable, rubber shields to the line of REDS, Swiss, Super Swiss 6 and Swiss Ceramics.
Each labyrinth shield fits into a groove cut into the inner race without touching the walls or bottom of the groove, so that dirt and water must go through a “labyrinth” or “U” shaped path to get to the inside of the bearing. The labyrinth shields are still removable for cleaning, but the skate time between cleanings is greatly increased. | OPTIONS
$75.00 |
back to top
|
 |
Bones Swiss
Removable synthetic high speed ball retainer. Shielding one side allows for skates cleaning and re-lubrication. Includes hardened steel balls, deep grooved speed races, high temperature tolerant, and low viscosity lubricant. | OPTIONS
$70.00 |
back to top
|
 |
Bones Super Swiss 6
Bones Super Swiss 6™ bearings are unique design that feature six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage creates a quicker acceleration, greater strength and durability. | OPTIONS
$75.00 |
back to top
|
|
8mm to 7mm Axle Sleeves
Some bearings like the 6-Ball Swiss (above) are only made in 8mm. Use 8mm bearings on your 7mm axle by using these spacer sleeves.
Sold in sets of 8. |
$5.00 |
back to top
|
 |
Perfect Swiss Bearings
Deep groove precision ball bearings designed originally for inline speed skating. Deep grooves ensure low resistance when skating a straight line or burning through a turn.
They are low maintenance, high-performance SWISS precision skate bearings at a great price. Brought to you by the same parent company as ANSWER wheels.
| OPTIONS
$55.00 |
back to top
|
 |
Bones China Reds
Bones REDS are manufactured in China to our Skate Rated™ specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. Made to the specifications of Bones Swiss and offer near Bones Swiss precision at a fraction of the price, The #1 selling bearing brand in the USA.
| OPTIONS
$30.00 |
back to top
|
